Digital Pressure Gauge

Additel – Digital Pressure Gauge

Comes with very wide pressure range up to 60,000 psi (4,200 bar) and accuracy class can be 0.2%FS , 0.1%FS , 0.05%FS , 0.02%FS and 0.1%RDG.

In 2024 , we have several  NEW ! Pressure Gauge models comes up. Let’s check this out, what models fit for your pressure calibration jobs.    

Pressure Test & Calibration Pump

Additel – Digital Pressure Gauge

Comes with very wide pressure range up to 60,000 psi (4,200 bar) and accuracy class can be 0.2%FS , 0.1%FS , 0.05%FS , 0.02%FS and 0.1%RDG.

In 2024 , we have several  NEW ! Pressure Gauge models comes up. Let’s check this out, what models fit for your pressure calibration jobs.    

Pressure Controller

Additel – Pressure Controller

  Most high accuracy pressure calibration is using automatic pressure controller to generate pressure accurately at the desired setpoint. Pressure Controller does not has an internal pump to generate the pressure but inside the systems it has high precision solenoid control system to control the inlet gases it can be either dry air or high purity nitrogen gas to outlet port.  We have 3 models in 2024, Let’s check this out below.

New !
ADT773 ,  ADT783  and  ADT793

Automatic Pressure Calibrator

Additel – Automatic Pressure Calibrator

  Currently, someone are still performing on-field pressure calibration with manual method for taking the readings. Are there any easier and faster ways to do this job ?. Yes, we have solution for that.

Automatic Pressure Calibrator is the reference instrument in working standard level to do pressure calibration mostly on-field calibration. It has many feature that helps end users to finish calibration jobs as fast as it can but still maintaining accuracy with lowest error.

Human Error…! during on-field calibration is still majority. With Additel Technology in pressure calibration by using Additel automatic pressure calibrator is the best choice you should have.

In 2024, we have 4 models of automatic pressure calibrators with wide pressure ranges. You can check this out which one is suitable for your pressure calibration jobs….!

Additel | Temperature Calibrator (Dryblock Calibrator)

   Comes with 3 series that covering temperature ranges from -40°C to 1210°C.  suitable for calibrating RTD , TC , Thermistor and all about temperature sensors in process instrument and temperature calibration laboratories.

Additel Dryblock Calibrator, this name is for the models that have temperature lower than 700°C , we can spit it off into First 2 Series with 6 models (6 temperature ranges)

1.)  ADT875 Dryblock Calibrator (For On-site Cal.)

– ADT875-155 ( -40 to 155°C)  
– ADT875-350 ( 33 to 350°C)  
– ADT875-660 ( 33 to 660°C)
– ADT875-1210 ( 100 to 1210 °C)  

2.)  ADT878 Dryblock Calibrator ( For Lab )

– ADT878-160 ( -40 to 160°C)  
– ADT878-425 ( 33 to 425°C)  
– ADT878-700 ( 33 to 700°C)  
– ADT878-1210 ( 100 to 1210 °C)  

Mini Water Triple Realization Application Feature on ADT878PC-160 (only)