Specifications
Inputs
Norma 6003
3 Voltage + 3 Current
Norma 6003+
3 Voltage + 3 Current + 1 Motor
Norma 6004
4 Voltage + 4 Current
Norma 6004+
4 Voltage + 4 Current + 1 Motor
Sample rate
200ks/s
Measurement update rate
100ms, 200ms, 500ms, 1s
Dimensions (H * W * L)
298mm x 215m x 96mm
Weight
3.5 kg (7.7 lbs)
Display
5.7 inch, TFT LCD, 640×480
Operating temperature
-10 °C to +50 °C
Storage temperature
-30 °C to +60 °C
Operating humidity
Non-condensing (< 10 °C )
≤ 90 % RH (at 10 °C to 30 °C)
≤ 75 % RH (at 30 °C to 40 °C)
≤ 45 % RH (at 40 °C to 50 °C)
Operating altitude
2000m
Storage altitude
12000m
Ingress protection
IP 50 (Terminals mated) according to IEC 60529:
Battery
BP 291, 10.8V/5000mAh, 54Wh IEC 62133, UN38.3
Operating time: 10 Hours (on battery)
Safety
IEC 61010-1: Pollution Degree 2
IEC 61010-2-030: CAT IV 600V, CAT III 1000 V
EMC
IEC 61326-1: Industrial
IEC 61326-2-2
Warranty
1 Year
Communication Interface
USB/RS485
Dual Analyzer Synchronization Mode
Able to extend to 6, 7 or 8 channels (using multiple instruments)
PC Software
Fluke Power Analyzer software
Storage Capacity
32GB
Data trend storage rate
As per display rate
Main Function
Meter, Scope, Harmonic, Phasor, Trend
Measuring Parameters
RMS, DC Component, AC Component, Rectified Mean, Peak Value, Peak-Peak, Crest Factor, Form Factor, Fundamental Component, Fundamental Content, Harmonic Distortion, Harmonic Content, Harmonic Factor for voltages and currents, Active Power, Reactive Power, Apparent Power, Power Factor, Phase Shift, Efficiency, Impedance, Electric Energy, Charge/Discharge capacity (Ah), Frequency, Motor Speed, Torque, Mechanical Power, Mechanical Energy, Summation function
Electrical Specifications
Voltage
Range
10 V, 100 V, 1000 V
Crest Factor
CF ≤ 2
Maximum Voltage
10 % overload
Input Impedance
2M Ω/10pF (Typical)
Temperature Coefficient
0.05 * (Spec)/k
Bandwidth
1000V range: 500kHz; 100V range: 200 kHz; 10V range:100 kHz
CMRR
120 dB @ 50/60 Hz
Accuracy (% reading + % range)
Range
1000 V
100 V
10 V
DC
0.1 + 0.1
0.1 + 0.1
0.1 + 0.2
AC (10Hz to 1kHz)
0.1 + 0.1
0.1 + 0.1
0.1 + 0.2
AC (10kHz)
5 + 0.5
5 + 0.5
5 + 0.5
Current
Crest Factor
CF ≤ 2
Temperature Coefficient
0.05 x (Spec)/k
Overload capacity
10 % overload
CMRR
120 dB @ 50/60 Hz
Shunt (current input)
Measuring Range
0.1 A, 1 A, 10 A
Input Impedance
0.025 Ω (Typical)
Bandwidth
10 A range: 500 kHz; 1 A range: 200 kHz; 0.1 A range: 100 kHz
BNC (voltage input)
Range
0.1 V, 1 V, 10 V
Input Impedance
100k Ω/100pF (Typical)
Bandwidth
10 V range: 500 kHz; 1 V range: 200 kHz; 0.1 V range: 100 kHz
Accuracy (% reading + % range)
Range
10 A
1 A
0.1 A
10 V
1 V
0.1 V
DC
0.1 + 0.2
0.1 + 0.5
0.1+2
0.1+0.1
0.1+0.2
0.1+1
AC (10Hz to 1kHz)
0.1+0.1
0.1+0.2
0.1+1
0.1+0.1
0.1+0.1
0.1+0.5
AC (10kHz)
5+1
5+1
5+1
5+1
5+1
5+1
Motor Module (Torque and Speed)
Voltage Range
± 10 V dc, 10 % overload
Voltage Channels
2
Input Impedance
1.1M Ω (Typical)
Accuracy at dc
0.1 % range + 0.1 % reading
Pulse Channels
3
Pulse Logic High Threshold
2 V (Typical)
Pulse Logic Low Threshold
0.8 V (Typical)
Maximum Pulse Frequency
100 kHz
Motor Module (Torque and Speed)
Frequency Accuracy
0.05 % range + 0.05 % reading
Harmonics
100 (50Hz/60Hz)
Calculation method
FFT/Interpolation
