Specifications
Key Features 628CH Thermal resolution 640*480 Detector type Uncooled focal plane array detector Thermal sensitivity <30 mk Detector pitch 17μm Spectral range 7.5μm~14μm FOV & IFOV Dependent on the lens configuration Focus type Automatic Temperature range -20℃-150℃
0℃-650℃
300℃-2000℃Accuracy ± 2 °C or ± 2 %, whichever is greater Measurement parameters Emissivity (0.01-1.0); Ambient temperature; Reflected temperature; Relative humidity; Distance; External optics compensation Partial emissivity Support Palettes 10 standard palettes and 10 inverted palettes Image process Non-uniform calibration, digital enhancement Mirror mode Left-right, up-down, center Video compression standard H.264 Radiometric stream 25Hz Pan-tilt-zoom station compatibility Support Pelco-D protocol Measurement tools 5 points, 10 lines and 10 regions, support Modbus output Software AnalyzIR; Open API FOTRIC SDK Ethernet type 10M/100M/1000M adaptive Network protocols IPv4，UDP，TCP，RTSP，RTCP，RTP Simultaneous stream Mainstream and substream: 10; Radiometric stream: 1 IP connection interface ONVIF Power connector Screw-on wire terminal Network connector Screw-on RJ45 with status indicator LED Alarm input/output 1 relay output, load capacity：24V，1.5A
1 optocoupler output：Voltage：3.3-24V，Max current: 35mA
1 optocoupler input：Voltage：3.3-24V，Input current : 5mA-15mASerial port 1 RS-485 Power supply 12V/24V DC, PoE Power consumption 4W Safety standards GB 4943.1-2011 | EN 62368-1:2014+A11:2017；GB/T 19870-2018 Electromagnetic compatibility GB/T 18268.1-2010 | EN 61326-1:2013
GB 17625.1-2012 | EN IEC 61000-3-2:2019
GB/T 17625.2-2007 | EN 61000-3-3:2013/A1:2019
GB/T 19870-2018
GB 4824-2019
EN 55032:2015/A11:2020
EN 55035:2017
FCC CFR47 Part15 subpart BProtection level IP40